Jewelry Box – Draik's Projects

Jewelry Box FAQ

Along the way, I’ve gone back and forth between components, boards, displays, and the lack of using parts I listed in my Parts post. I hope this sorts out the hurdles, and helps someone that stumbles across my site.

Category: Jewelry Box | Comments Off

February 20

Jewelry Box: Components Complete

There are two factors to making this sketch complete:

if it isn’t broken, don’t fix it, and
don’t reinvent the wheel, if all you need is new tread

The example sketches provide much of what I want to do, and they work in the way I need for my jewelry box; refer back to the two points! With the exception of a few changes to function calls, and minor code addition, the majority of the sketch is a copy/paste from example sketches.

Category: Arduino, Jewelry Box | LEAVE A COMMENT

February 10

Jewelry Box: Arduino Board Upgrades

As with many projects that start as rough draft ideas, they tend to grow bigger than anticipated, before it’s done. This isn’t always a bad thing, but it means you’re never done, unless you can commit to one “final” design.

Category: Arduino, Jewelry Box | Comments Off

January 31

Jewelry Box: The Sum of Its Parts

All the parts are coming together, and it’s best to keep each working sketch separate along the way, until it’s time to piece them together. Using the example sketches, which already perform the tasks I want, I’ll strip the parts I need, and put it to use in my final sketch.

Category: Arduino, Jewelry Box | Comments Off

January 30

Jewelry Box: New 2.8″ TFT Display Attempt

One step forward, and two steps back. Due to all the issues with the Seeed Studio 2.8″ TFT display, I moved on to a different unit, and from Adafruit. I did my research, and found their documentation, libraries, and support forums to be exceptional, especially for the occasional DIYer like myself.

Category: Arduino, Jewelry Box | Comments Off